Centrifuges have rotating containers that vary in form depending on their use and are most widely used for concentrate and purification of suspended or molten materials. The dichotomycetes with a higher density than the preexisting liquid are intended to spread to the edge, while the denser is centered. Centrifugation devices are used for concentrate and purification of suspended solids or molten materials.
A Viscometer
It measures high and low viscosity, displays various measurements such as temperature, shear rate, % torque, speed/spin, and automatically displays a range of 0.2% in various languages.
PH Meter
This type is measured by direct current steam (e.g. vacuum tube voltmeter) with large cubic resistance between the glass electrode and the calomel electrode as a reference electrode. Used to measure pH of water and meteorological products.
Water Gauge
The organic solvents used in the company are tested for moisture first. If the final usage is determined by checking the SPEC IN/OUT after the raw material test, use the product inspection after production of the finished product.
NCO Meter
It is used to check the NCO content of Isocyanate for raw materials and reactives of the products received, and to determine the progress of the response and the acceptance of the products.
Tensile Strength(UTM)
To check the adhesion of adhesive during R&D and product inspection, measure initial adhesion/post adhesion of intermediate process and finished product with UTM.
UV LAMP
UV stands for multiviolet rays. lamps emitting ultraviolet light. It is used as a test to promote the deterioration of UV light, or as a disinfectant.
FT-IR
Measuring the sensitivities of high-molecular materials, it checks for abnormalities compared to standard products of the product, and is used for import inspection and process inspection of raw materials.
G.C
Organic solvents included in R&D products and raw materials are used to enhance quality of development products and promote stable product production through qualitative and quantitative analysis.
A Pencil Scale
Multiple channel expansion test according to the specimen material, wear on the flat surface, change head for each test other than the pencil hardness test, and fit a high-precision Micro processor control system.
Wearability TEST
Using a circular loop, the Taber wheel can be tested by freely changing the speed and load with the test device. This is a tester that measures the wear resistance of plastic, rubber, film, etc.
Ericsson tester
Ericsson tester is used to test the adhesion of paint, film, etc. Measure the Ericsson value of the metal sheet adhesion.
Adhesion
Inverter mounting. It is a device that can adjust the distance between two rollers and bond at a constant speed and pressure.
CORONA TEST Machine
The purpose of corona surface treatment on plastic films such as polyethylene and polypropylene is used to improve the printability of film and to improve adhesion with other film in the manufacture of multi-layer films through laminations.
OVEN Machine
Forced cyclical method with the highest temperature distribution, the temperature deviation and temperature distribution are uniform and the internal air circulation FAN is quickly and uniformly controlled. Compared to natural circulation, it has a faster dry and even temperature distribution.
PUR TEST machine
PUR Hot Melt Adhesives, which are 100 percent environmentally friendly, highly durable and materialized, are designed to be miniaturized in the same way as on-site facilities for convenient and efficient testing in a lab. It has a structure that can vacuum, heat, and stir-fry, and has a discharge unit to test the same as the finished product.
UV TEST Machine
The UV TEST machine is designed to reduce the time of the environmental cycle by measuring the change in ultraviolet light of product development, so it can help develop UV color products.
Thermal compressor
It is easy to use for testing the adhesion of plastic products, and it has the advantage of being able to experiment with different types of heat, especially in low and high temperature conditions.
MESH ROLL Coating machine
Gravia copier is a low- and medium-altitude, low-speed, easy-to-operate, and is useful for various types of resin coating such as silicon, adhesion coating, and magnetic media coating.
The world of gloss
BYK-Gardner's polish is a lightweight compact, the most convenient advantage of portable devices, with a variety of features built into Micro Processor. The gloss meter has three different levels of light intensity and sensor angle, and a micro-TRI-gloss meter that measures 20 degrees, 60 degrees, and 85 degrees simultaneously. In general, 60 degree polishing is the most common, 20 degrees for high-gloss products and 85 degrees for low-gloss products. Measure the glossiness of the treatment agent and use it for product development and testing.
AUTO CLAVE
Autoclave refers to a high-pressure reactor, and for industrial/research purposes, it is a heat-resistant container that can induce chemical reactions such as synthesis, decomposition, sublimation and extraction in high-temperature environments.
Ash Meter
It is heated by heat buried in a heat plate, and heated on three sides. Control box is separately constructed from the heating part, focusing on the internal warm-up speed and heat.
STAND MILL
Small bexels are wasteful of solvents when working in small quantities, and have a powerful distributed effect that makes it easy to work with high viscosity products and are highly distributed.
ESTER Reactor
After testing production, a variety of Ester necessary for product development was installed to satisfy the chemical and physical properties desired by the customers by installing a small filter to make a sample for product development.
A laboratory's two-story application/Physical laboratory
Organic/organic chemistry manages the physical/chemical melting, mixing, and dispersion of various substances by analyzing the composition and properties of these compounds.
Technical room
The medical institution manages the technical compartment for physical experimentation and operates to verify the product and material of the item produced by the company.
Equipment analysis department
It has various analysis and experimental devices and operates a device analysis center that can parallel physical testing and qualitative and quantitative analysis of raw materials.
Urethane/acryl (petrophy) composite on the third floor of the laboratory
We combine special polyurethane in itself, not in the process of purchasing raw materials, to sell product development requested by customers by satisfying various properties, and all materials based on the product are optimized for development by researching in the composite room.
